Tin tức
Sản phẩm mới
Hỗ trợ trực tuyến
HOTLINE

0901.428.999
Phương Vy:  
Email: sales@giaha.vn
lượt truy cập
Đang online:23
Lượt truy cập:592878
Seneca
Z-10-D-IN
10-ch Digital Input ModBus

Thông tin chi tiêt sản phẩm

Description:

Manufactured by Seneca, the Z-10-D-IN is a ModBUS module with 10 configurable digital input channels that share the same single digital common. The 16 bit totalizers have a maximum frequency of 100 Hz, two inputs have a higher speed up to 10 kHz. The digital inputs can accommodate relay or open collector output signals. The Z-10-D-IN is easily configurable using Z-PROG the configurating software for Windows.
The Z-10-D-IN is fully compliant with the Modbus RTU protocol guaranteeing an almost limetless number of applications including data acquisition, automation, telemetry control etc.


Specification:

 

  • Opto Isolated Digital Inputs: Reed relay, PNP, NPN, etc.
    • On Level
    • Voltage >14 V
    • Current > 4 mA
    • Off Level
    • Voltage < 6 V
    • Current < 1 mA
  • 16 bit Totalizer for Each Input
  • Transducer Supply 20 Vdc at 80 mA
  • Isolation 1500 Vac, Field to Logic
  • Status Indicators Error, Power, RX & TX
  • Digital input status
  • Communications Port:2 Wire RS485
    • Speed (baud) 9600, 19,200, 38,400, 57,600,
    • Front Jack: 2400 Baud
    • Input Frequency:
      • 100 Hz for CH: 1-8
      • 10 kHz for CH: 9 & 10
    • Minimum pulse width
      • 4 ms CH: 1-8
      • 50μs CH: 9 & 10
  • Measurement Error
  • Frequency ± 1 Hz: CH 1-8; 0.1%: CH 9 & 10
  • Operating Temp 0 to 55 °C 
  • Humidity 30 to 90% at 40 °C non-cond.
  • 1500 V Isolation Field to Logic
  • Modbus Communications
  • Input Protection to 600 W/ms
  • Configuration and Setup Software IEC 61131
  • Compact DIN Rail Mounting design, just 100 x 112 x 17.5 mm
  • Removable Terminal Blocks
  • Power Supply: 19 to 40 Vdc or 19 to 28 Vac

Sản phẩm liên quan